Outline of the product, 1. preface, 2. purpose of use – RKI Instruments RM-5000 Series Indicator/Alarm Unit User Manual
Page 3: 1 outline, The product, Preface, Purpose of use, Definition of danger, warning, caution, and note, 2 important, Notices on safety
1 Outline of the Product
1-1. Preface
- 3 -
RM-5000
1
Outline of the Product
1-1. Preface
Thank you for choosing our indicator/alarm unit RM-5000 series for use with the gas detection and alarm
system. Please check that the model number of the product you purchased is included in the specifications
on this manual.
This manual explains how to use the indicator/alarm unit and its specifications. It contains information
required for using the indicator/alarm unit properly. Not only the first-time users but also the users who have
already used the product must read and understand the operating manual to enhance the knowledge and
experience before using the indicator/alarm unit.
1-2. Purpose of use
• Use the indicator/alarm unit RM-5000 series in combination with a gas detector head on a one-on-one
basis.
GP-5001:
Combustible gas indicator/alarm unit to be used in combination with a catalytic combustion
type detector head
NC-5001:
Combustible gas indicator/alarm unit to be used in combination with a new ceramic type
detector head
NC-5001W: Combustible gas indicator/alarm unit with double range specifications to be used in
combination with a new ceramic type detector head
NP-5001:
Combustible gas indicator/alarm unit to be used in combination with a thermal conductivity
type detector head
SP-5001:
Combustible gas or toxic gas indicator/alarm unit to be used in combination with a hot-wire
semiconductor type detector head
GH-5001: Combustible gas or toxic gas indicator/alarm unit to be used in combination with a
semiconductor type detector head
EC-5002:
Toxic gas indicator/alarm unit to be used in combination with an electrochemical type
detector head
OX-5001:
Oxygen indicator/alarm unit to be used in combination with a detector head that uses an
oxygen sensor
OX-5002:
Oxygen indicator/alarm unit to be used in combination with a detector head that uses an
oxygen sensor
RM-5002: Indicator/alarm unit to be used in combination with a gas detector head that outputs general
measurement signals
RM-5003: Gas indicator/alarm unit to be used in combination with a gas detector head with 3-wire
type 4 - 20 mA output specifications