Blade ICE RACKSWITCH G8124-E - Manual (Page 123)

BLADEOS 6.5.2 Application Guide
BMD00220, October 2010 Chapter 8: Spanning Tree Protocols 123
3. Configure the following on application switch C:
Add port 8 to VLAN 3 and define STG 2 for VLAN 3.
VLAN 3 is automatically removed from STG 1. By default VLAN 1 remains in STG 1.
4. Switch D does not require any special configuration for multiple Spanning Trees. Switch D uses
default STG 1 only.
RS G8124(config)# vlan 3
RS G8124(config-vlan)# enable
RS G8124(config-vlan)# member 8
RS G8124(config-vlan)# exit
RS G8124(config)# spanning-tree stp 2 vlan 3