Blade ICE RACKSWITCH G8124-E - Manual (Page 297)

BLADEOS 6.5.2 Application Guide
BMD00220, October 2010 Chapter 20: OSPF 297
8. Use the hide command to prevent a range of addresses from advertising to the backbone.
Verifying OSPF Configuration
Use the following commands to verify the OSPF configuration on your switch:
show ip ospf
show ip ospf neighbor
show ip ospf database database-summary
show ip ospf routes
Refer to the BLADEOS Command Reference for information on the above commands.
RS G8124(config)# router ospf
RS G8124(config-router-ospf)# area-range 2 address 36.128.200.0
255.255.255.0
RS G8124(config-router-ospf)# area-range 2 area 0
RS G8124(config-router-ospf)# area-range 2 hide
RS G8124(config-router-ospf)# exit