Blade ICE RACKSWITCH G8124-E - Manual (Page 257)

BLADEOS 6.5.2 Application Guide
BMD00220, October 2010 Chapter 18: Internet Group Management Protocol 257
Configure IGMP Filtering
1. Enable IGMP Filtering on the switch.
2. Define an IGMP filter with IPv4 information.
3. Assign the IGMP filter to a port.
>> # ip igmp filtering
>> # ip igmp profile 1 range 224.0.0.0 226.0.0.0
>> # ip igmp profile 1 action deny
>> # ip igmp profile 1 enable
>> # interface port 3
>> (config-if)# ip igmp profile 1
>> (config-if)# ip igmp filtering