Blade ICE RACKSWITCH G8124-E User Manual
Page 350
BLADEOS 6.5.2 Application Guide
350 Chapter 25: Link Layer Discovery Protocol
BMD00220, October 2010
LLDP transmissions can also be configured to enable or disable inclusion of optional information,
using the following command (Interface Port mode):
where type is an LLDP information option from
:
By default, all optional LLDP information types are included in LLDP transmissions.
RS G8124(config)# interface port 1
RS G8124(config-if)# [no] lldp tlv
<type>
RS G8124(config-if)# exit
Table 24
LLDP Optional Information Types
Type
Description
portdesc
Port Description
sysname
System Name
sysdescr
System Description
syscap
System Capabilities
mgmtaddr
Management Address
portvid
IEEE 802.1 Port VLAN ID
portprot
IEEE 802.1 Port and Protocol VLAN ID
vlanname
IEEE 802.1 VLAN Name
protid
IEEE 802.1 Protocol Identity
macphy
IEEE 802.3 MAC/PHY Configuration/Status, including the
auto-negotiation, duplex, and speed status of the port.
powermdi
IEEE 802.3 Power via MDI, indicating the capabilities and status of
devices that require or provide power over twisted-pair copper links.
linkaggr
IEEE 802.3 Link Aggregation status for the port.
framesz
IEEE 802.3 Maximum Frame Size for the port.
dcbx
Data Center Bridging Capability Exchange Protocol (DCBX) for the port.
all
Select all optional LLDP information for inclusion or exclusion.