Blade ICE RACKSWITCH G8124-E - Manual (Page 51)

BLADEOS 6.5.2 Application Guide
BMD00220, October 2010 Chapter 2: Initial Setup 51
Optional Setup for Telnet Support
Note – This step is optional. Perform this procedure only if you are planning on connecting to the
G8124 through a remote Telnet connection.
1. Telnet is enabled by default. To change the setting, use the following command:
2. Apply and save the configuration(s).
>> # /cfg/sys/access/tnet
>> System# apply
>> System# save