Rmon group 1-statistics, Example configuration, Rmon group 1—statistics – Blade ICE RACKSWITCH G8124-E User Manual
Page 370
BLADEOS 6.5.2 Application Guide
370 Chapter 27: Remote Monitoring
BMD00220, October 2010
RMON Group 1—Statistics
The switch supports collection of Ethernet statistics as outlined in the RMON statistics MIB, in
reference to etherStatsTable. You can configure RMON statistics on a per-port basis.
RMON statistics are sampled every second, and new data overwrites any old data on a given port.
Note –
RMON port statistics must be enabled for the port before you can view RMON statistics.
Example Configuration
1.
Enable RMON on a port.
2.
View RMON statistics for the port.
RS G8124(config)# interface port 1
RS G8124(config-if)# rmon
RS G8124(config-if)# show interface port 1 rmon-counters
------------------------------------------------------------------
RMON statistics for port 3:
etherStatsDropEvents:
NA
etherStatsOctets:
7305626
etherStatsPkts:
48686
etherStatsBroadcastPkts:
4380
etherStatsMulticastPkts:
6612
etherStatsCRCAlignErrors:
22
etherStatsUndersizePkts:
0
etherStatsOversizePkts:
0
etherStatsFragments:
2
etherStatsJabbers:
0
etherStatsCollisions:
0
etherStatsPkts64Octets:
27445
etherStatsPkts65to127Octets:
12253
etherStatsPkts128to255Octets:
1046
etherStatsPkts256to511Octets:
619
etherStatsPkts512to1023Octets:
7283
etherStatsPkts1024to1518Octets:
38