Blade ICE RACKSWITCH G8124-E - Manual (Page 290)

BLADEOS 6.5.2 Application Guide
290 Chapter 20: OSPF BMD00220, October 2010
3. Define the backbone.
The backbone is always configured as a transit area using areaid 0.0.0.0 .
4. Define the stub area.
5. Attach the network interface to the backbone.
6. Attach the network interface to the stub area.
RS G8124(config-router-ospf)# area 0 area-id 0.0.0.0
RS G8124(config-router-ospf)# area 0 type transit
RS G8124(config-router-ospf)# area 0 enable
RS G8124(config-router-ospf)# area 1 area-id 0.0.0.1
RS G8124(config-router-ospf)# area 1 type stub
RS G8124(config-router-ospf)# area 1 enable
RS G8124(config-router-ospf)# exit
RS G8124(config)# interface ip 1
RS G8124(config-ip-if)# ip ospf area 0
RS G8124(config-ip-if)# ip ospf enable
RS G8124(config-ip-if)# exit
RS G8124(config)# interface ip 2
RS G8124(config-ip-if)# ip ospf area 1
RS G8124(config-ip-if)# ip ospf enable
RS G8124(config-ip-if)# exit