Blade ICE RACKSWITCH G8124-E - Manual (Page 342)

BLADEOS 6.5.2 Application Guide
342 Chapter 24: Virtual Router Redundancy Protocol BMD00220, October 2010
4. Enable tracking on ports. Set the priority of Virtual Router 2 to 101, so that it becomes the Master.
5. Configure ports.
6. Turn off Spanning Tree Protocol globally.
RS G8124(config-vrrp)# virtual-router 1 track ports
RS G8124(config-vrrp)# virtual-router 2 track ports
RS G8124(config-vrrp)# virtual-router 2 priority 101
RS G8124(config-vrrp)# exit
RS G8124(config)# vlan 10
RS G8124(config-vlan)# enable
RS G8124(config-vlan)# member 1
RS G8124(config-vlan)# exit
RS G8124(config)# vlan 20
RS G8124(config-vlan)# enable
RS G8124(config-vlan)# member 2
RS G8124(config-vlan)# exit
RS G8124(config)# no spanning-tree stp 1