Step 2 – alignment of “side- by-side” plenums, Step 2 – alignment of “side-by-side” plenums, Figure 75 – Rockwell Automation 1512A MV Controllers, 400A One-High Cabinet, Standard and Arc-Resistant Enclosure User Manual
Page 85
Advertising
Rockwell Automation Publication 1512A-UM100F-EN-P - May 2013
77
ArcShield Plenum Installation Instructions
Appendix B
Figure 75 - Plenum Placement
STEP 2 – Alignment of “Side-
by-Side” Plenums
Plenums mounted side-by-side must be fastened together through the aligning
holes using 5/16 in. supplied hardware (see
Use recommended torque
value for 1/4-20 fasteners
TIP
Use silicone caulking generously to fill any air gaps once the Plenum has been
securely mounted in place.
Advertising