Rockwell Automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device - Manual (Page 24)

24 Ethernet-to-DeviceNet Linking Device
Rockwell Automation Publication 1788-IN055C-EN-P - September 2011
(Optional) Disable Autobaud
If you do not want the linking device to automatically determine the network
communication rate, disable Autobaud. By default, the linking device has
Autobaud enabled.
1. In RSNetWorx for DeviceNet software, highlight the linking device by
clicking on its icon.
2. From the pull-down menu, choose Device>Class Instance Editor.
3. If a warning text box appears, click Yes.
You see the Class Instance Editor dialog box.
4. From the pull-down menu, choose Description>Set Single Attribute.