Rockwell Automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device - Manual (Page 33)

Ethernet-to-DeviceNet Linking Device 33
Rockwell Automation Publication 1788-IN055C-EN-P - September 2011
You see the Module Properties dialog box.
18. In the Name field, enter a module name.
19. Click the IP Address radio button and enter the IP address for which the
linking device is configured.
20. Click Next.
21. Enter the Requested Packet Interval (RPI or update rate) in a range from
2…750 ms.
If you see errors in this field
when you are online, see the
table following this illustration.