Rockwell Automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device User Manual
Page 28
28 Ethernet-to-DeviceNet Linking Device
Rockwell Automation Publication 1788-IN055C-EN-P - September 2011
1.
In RSNetWorx for DeviceNet, go online by choosing Network>Online.
2.
Select Network>Single Pass Browse. Wait for browsing to complete.
3.
Select Network>Upload from Network. Wait for the device
information to be uploaded from the network.
4.
Double-click the linking device icon to bring up the Module
Description dialog box.
Several tabs appear on the top of the dialog box.
5.
Click the Scanlist tab.
6.
In the informational text box that appears, click Upload.
The dialog box shows two columns. On the left is a list of available
devices that may be added to the scan list. On the right is a list of devices
that are configured in the scan list.
7.
Check AutoMap on Add.