Rockwell Automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device - Manual (Page 29)

Ethernet-to-DeviceNet Linking Device 29
Rockwell Automation Publication 1788-IN055C-EN-P - September 2011
8. Select the I/O devices on the left side of the dialog box and click > to
move it to the right side of the dialog box.
9. Select the Input tab.
The Input mapping dialog box is displayed.
The top portion of this dialog box gives a
list of the devices in the scan list from
which the linking device receives input
data. The bottom shows the location in the
Input table where the data will be placed
for each device. This shows the format of
the Input table of the linking device. This is
the format of the input data that will be
sent to the EtherNet/IP scanner.