Rockwell Automation 1788-EN2DN Ethernet-to-DeviceNet Linking Device - Manual (Page 42)

42 Ethernet-to-DeviceNet Linking Device
Rockwell Automation Publication 1788-IN055C-EN-P - September 2011
DeviceNet Network Status Indicator
I/O Status Indicator States
Indicator Status Description
Flashing green Idle Module is in Idle mode.
Solid green Running Module is in Run mode.
Solid orange Hardware Initialization The status indicator will be in this state immediately
after power is applied.
Flashing red/green Error A fault has been detected.
Off No I/O No DeviceNet I/O configured.
DeviceNet Network Status Indicator States
Indicator Status Description
Solid green Online and
communicating The linking device is on the DeviceNet network and
communicating with at least one device.
Flashing green Online, no
communication The linking device is on the DeviceNet network and
is not currently communicating with any devices.
Solid red DeviceNet interface
fault A major fault in the DeviceNet interface has been
detected. Possible causes include Bus-off or
duplicate MAC ID.
Flashing red Connection time-out A connection with at least one slave device has
timed out.