Bendix Commercial Vehicle Systems SMARTIRE TPMS OPERATORS MANUAL User Manual
Page 20
20
7. To save the settings you’ve entered into the Wireless Gateway Receiver, click ‘Save
Configuration’ on the Axle Configuration screen.
To save the settings for use on another vehicle, click the ‘Load/Save Configuration’ button (or
press ALT-5). On this screen, click ‘Save Configuration’ and choose the filename and location to
save this file. Included in the saved file is:
Axle
layout
Axle CIP levels
Alert
Levels
All Sensor IDs
Once you’ve saved a configuration, when you start the Diagnostic Tool the next time, you must
simply go to the ‘Load/Save Configuration’ screen and click ‘Load Configuration’ to restore the
complete profile you were working on previously. You can then proceed to programming the
sensors into the new Gateway Receiver.
Learning Sensors
After setting up or loading a profile, you can begin programming sensors into the Gateway.
1. On the Setup tab, select the ‘Sensor Configuration’ button.