Bendix Commercial Vehicle Systems SMARTIRE TPMS OPERATORS MANUAL - Manual (Page 78)

10.0 SYSTEM SCOPE OF USE AND ALERTS
This tire monitoring system does not in any way replace the need for regular maintenance of the
tire pressures and visual inspection of tires for damages.
10.1 SYSTEM INSTALLATION AND USAGE
Warranty of the SmarTire
™
system requires that it has been properly installed and programmed
by qualified personnel according to Bendix documentation. This includes all manuals and any
supplementary installation instructions included with system components.
10.2 USE OF CHEMICALS
Use of temporary resealing or re-inflation products containing internal sealers or propellants in
any tire/wheel assembly may adversely affect the operation of the Sensor/Transmitters and void
the warranty.
10.3 REACTING TO ALERTS
When an alert is detected, reduce vehicle speed to an appropriate, safe level and proceed to a
safe stopping location or facility where the tire can be inspected and serviced.
10.4 FCC NOTICE
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation. This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna,
 Increase the separation between the equipment and receiver,
 Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected,
 Consult the dealer or an experienced radio/tv technician for help.
Changes or modifications to this device without the express approval of Bendix may void the
user’s authority to use this device.