Bendix Commercial Vehicle Systems SMARTIRE TPMS OPERATORS MANUAL - Manual (Page 24)

24
4.0 DISPLAY OVERVIEW: ALERTS
SMARTIRE
™
Display Dual Light Display
Note: If you are using a 3
rd
party display to view SmarTire
™
information, please refer to the
respective user manual or contact your vehicle vendor for instructions.
4.1 POWER, MOUNTING, AND ENVIRONMENTAL REQUIREMENTS
 Operating voltage range 8.5 – 36V
 Typical current consumption (with no external loads) 30mA
 Connector type: 1062-16-0122-Deutsch
 Lock: W6S-Deutsch
 Plugs:
DT06-6S-Deutsch
 SAE J1939 protocol compliant, 250 kbps
 Overall depth of unit (back of bezel to the end of the connector): 2.55 in.
 Bezel thickness: 0.240 in (6.069 mm).
 Bezel diameter: 2.29 in (58.166 mm).
 Panel Cutout: Std SAE 2 in. gauge panel cutout
 Mounting (clamp ring and wave spring): 0.050 to 0.130 in (1.27 mm to 3.302 mm).
4.2 J1939 CONNECTOR PIN DESCRIPTIONS
Check the back of the 6-pin Deutsch connector for numbering.
Line Colors versus Pin Numbers for Standard SmarTire
™ Harnesses (White wires are
labeled for Display connector):
Pin 1 2 3 4 5 6
Line
Color
Red Black White Yellow Green White
Vin
GND
Backlight
6 1
5 2
4 3 (Buzzer) Output
CAN - L
CAN - H