Bendix Commercial Vehicle Systems SMARTIRE TPMS OPERATORS MANUAL User Manual
Page 50
50
6.5 WIRELESS GATEWAY RECEIVER SPECIFICATIONS
6.5.1 Power, Mounting, and Environmental Requirements
Operating voltage range 8.5 – 36V
Typical current consumption (with no external loads) 0.12A
5A fuse is required between the main power line of the receiver and the vehicle
battery
Preferred mounting orientation to shed water is vertical (Connector side facing down)
Preferred Mounting hardware: ¼ -20 (M6X1) Flange Head CAPSCREW, torque to
7-10 FT/LBS (13 Nm)
Mating Connector: Plug Tyco Amp 1473712-1
Operating temperature range: -40°F to +185°F (-40°C to +85°C); Sealed to
IP67;Tested to SAE J1455, J1113
Frequency 433.92 MHz
Communication
Interface: RS-232 (diagnostic interface port via harness); SAE J1939
protocol compliant, 250 kbps
6.5.2
Wireless Gateway Dimensions (inches)