Metrohm NIRS Analyzer PRO - Manual (Page 40)

38 ▪▪▪▪▪▪▪
12
Connection to Vision Software
Analyzer PRO is designed to operate with Vision software. Vision requires a User ID and password for
entry as a security measure. Each user must operate within a “Project” inside Vision. The procedure
for creating a Project will be shown. Inside the Project, Vision uses a Data Collection Method (DCM)
to communicate with the Analyzer PRO.
Please follow this procedure to connect:
1. Click on the Start icon, then click on
Vision in the menu as shown.
Alternatively, if a Vision icon appears on
the desktop, double-click it to open
Vision.
2. The Vision log-in box is shown. Type in
the default User ID “NIRS” and then the
default password, “NIRS”.
Click “OK”. Vision will open.
3. Vision prompts the user to create a new
Project. Enter the name of the Project,
using a logical name such as that
shown, or a name related to the
product being analyzed.
The name can be up to 16 characters,
with no spaces. It may not contain
characters like “/”, “+”, “*”, or other
such characters. The name will be
shown in lower-case.
Location may be left empty, and Vision
will place the Project database in the
default Vision directory.
Click “OK”.