Metrohm NIRS Analyzer PRO - Manual (Page 43)

▪▪▪▪▪▪▪ 41
11. The Profess Analyzer
sends its
configuration to the
Data Collection
Method – this is a
“Window Reflection”
system, as shown in
the Sampling system
“Module” box.
The wavelength
range is 1100-1650
nanometers.
Reference
Standardization is a
default for this model,
and the box is
checked.
The “Method” name is empty when the DCM is displayed. Enter a name for the method. The
name used here is “Window Refl”. Spaces are allowed in the DCM name.
Click “OK” when finished.
12. Vision displays the selection box for the DCM.
Click on the method just created, then click on
“OK”.
You may hear some clicking noises from the
Analyzer PRO instrument as it executes internal
checks. These noises are normal.
13. Vision checks to verify that the instrument is
stable. If the Analyzer PRO was just turned on,
this may take some time, depending on ambient
temperature.
Once the instrument is stabilized, this box is
removed from the screen.