1 introduction, Instrument description, Theory of operation – Metrohm 750 Autosampler User Manual
Page 4: Control elements, Information on the instructions for use, Organization, Notation and pictograms, Safety notes, Electrical safety, General precautionary rules
Advertising
1.1 Instrument description
750 Autosampler
1
1
Introduction
1.1
Instrument description
The 750 Autosampler is a microcomputer-operated sampling/con-
troller system designed to be used with the ion chromatographic in-
struments 732 IC Detector and 733 IC Separation Center. It has a ca-
pacity of up to 128 samples, which are transferred automatically into
the sample loop of the 733 IC Separation Center.
The 750 Autosampler performs up to four, fixed loop injections per vial
at user-selectable time intervals. All operating parameters are entered
from the front panel. Additionally, the instrument can be controlled re-
motely either by an externally programmable contact closure or through
the RS232 connector located on the rear panel.
Fig. 1: 750 Autosampler
Advertising