ADS Environmental Services Model 4000 530017 A0 - Manual (Page 116)

B-2 ADS Model 4000 Manual
ID Switch Settings
The ID switch, designated as SW2 on the processor board,
identifies the monitor serial number. This number must be correct
to ensure successful communication operations with the monitor.
The switch consists of 8 settings representing the last 2 digits of the
5-digit monitor serial number. The first 4 numbers (settings)
represent the last (fifth) digit of the serial number; the last 4
numbers (settings) represent the fourth digit. Each setting has a
corresponding value (weight). The sum of the weights of all
settings in the closed position for the first 4 settings represents the
last digit in the serial number. The sum of the weights of all
settings in the closed position for the last 4 settings represents the
fourth digit in the serial number.
For example, a monitor with the serial number 3526 would require
the user to close (turn on) settings 2 and 3 for the last digit of the
monitor serial number and setting 6 for the fourth digit of the serial
number. The weights corresponding to the settings for the last digit
are 2 and 4, for a sum of 6 (the last digit in the serial number). The
weight corresponding to the setting for the fourth digit is 2 (the
fourth digit in the serial number).
Note: For SW2, closed means on and open means off.
1 2 3 4 5 6 7 8
1 2 4 8 1 2 4 8 weights
OPEN
SW2
ID switch settings for monitor serial number 35P26