Baseline Systems BaseStation 3200 V12 - Manual (Page 100)

BaseStation 3200 Advanced Irrigation Controller Manual
Test All Report
The Test All report displays when you turn the dial to the Reports position. This report shows the
status of all devices that are connected to your
controller.
To scroll through the report, press the Next button
to highlight the Scroll field, and then press the +
button.
Moisture Sensor Data
The Soil Moisture Sensor Data report shows a
moisture graph for each of the moisture sensors
connected to the controller.
The graph shows the watering limits:
• Green line = lower limit – Allow watering at the
next start time when the moisture has dropped
below this limit
• Red line = upper limit – Stop watering during a
water cycle when the moisture reaches this
limit
To display the Soil Moisture Sensor Data report
1. Turn the dial to the Reports position.
2. In the Select Report field, press the + button until Moisture displays in the box.
3. Perform any of the following options:
 To view the report for a different sensor, press the Next button to highlight the soil
moisture sensor serial number, and then press the + or – button.
 To view the report for a different date, press the Next button to highlight the Report
Date field, and then press the + or – button.
Page 94