Baseline Systems BaseStation 3200 V12 - Manual (Page 55)

BaseStation 3200 Advanced Irrigation Controller Manual
Instructions
1. Turn the dial to the Programs position.
2. Press the Next button to highlight the Program Start Days Setup option, and then press the
Enter button. The Start Days screen displays.
3. Verify that the number displayed in the Program field matches the program that you want to
set the historical calendar watering schedule for. If you want to select a different program,
press the + or – button to change the program number.
4. Press the Next button to move to the Schedule Type field. Press the + button to move
through the options, and then stop when Historical Cal is displayed in the field.
5. Press the Next button to
move to the Next Start
field. The date is
calculated based on
today’s date and the
preconfigured interval.
6. Press the Next button to
move to the Day Interval
Calendar. The selected
day interval is indicated
by a colored box on a
number. The date field
displays the half month
that is represented by that number.
Note: The calendar displays 12 boxes that represent the months of the year. The numbers in
the boxes represent the day intervals for first half and second half of the month.
 To increase or decrease the selected day interval, press the +/– buttons.
 To turn watering off during the selected day interval, press the – button to set the
number to zero.
 To move to and select a different day interval, press the Next button.
7. When you have finished configuring the Historical Calendar settings, turn the dial to the RUN
position.
Note: If you set up multiple programs to use the Historical Calendar settings, be sure to set
the program start dates so the interval is staggered. Refer to Setting Up the Start Days for a
Program on page 47.
To set up the water windows for a program
Water windows tell the controller when watering is allowed and not allowed. You can set water
windows for either Weekly (shown on illustration below) or daily – when moving from weekly to
daily, the weekly settings are copied to each day of the week.
Selecting daily water windows gives you hourly control of watering for each day of the week, and
for each program. A white square will pause watering for that hour, or keep a start time from
starting a program.
Page 49