Baseline Systems BaseStation 3200 V12 - Manual (Page 33)

BaseStation 3200 Advanced Irrigation Controller Manual
Status Colors
The following colors display on the RUN screen to indicate the status of programs, master valves,
flow meters, and zones.
Idle (watering done)
Active (watering)
Waiting to water
Soaking
Disabled
Paused
Off or Message (blinking)
Unused
On-Screen Reports
The on-screen reports include the results of Test All, the soil moisture graph, the run time graph,
and the water used graph.
Note: Refer to Notes, Messages, and Logs on page 94 for the complete description of the on-screen
reports.
1. Turn the dial to the Reports position.
2. In the Select Report field, press the + or – button select the various reports.
Power Cycling or Restarting the Controller
If the controller goes into an abnormal state and does not respond, you might need to restart it.
1. Turn the dial to OFF.
2. Press and hold the – and + and Enter buttons for approximately 5 seconds.
3. After the screen goes blank, release the buttons.
4. Turn the dial to RUN. The controller restarts.
Page 27