Baseline Systems BaseStation 3200 V12 - Manual (Page 41)

BaseStation 3200 Advanced Irrigation Controller Manual
Searching For and Assigning Soil Moisture Sensors (for Start, Stop,
Pause Conditions)
The BaseStation 3200 supports 25 soil moisture sensors. Any soil moisture sensors used to monitor
start, stop, and pause conditions are included in the total count.
1. Turn the dial to the Start, Stop, Pause position.
2. Press the Next or Previous button to highlight the Moisture Control Setup option.
3. Press the Enter button. The Moisture Sensors
screen displays.
4. All is highlighted in the Program column.
Perform one of the following:
 To associate the moisture sensor with
the full controller, continue to step 5.
 To associate the moisture sensor with a
specific program, press the + button to
move to the program number. Continue
to step 5.
5. Press the Next button to highlight Search.
6. Press the Enter button to search for moisture sensors. The serial numbers of the sensors are
shown in the Moisture Sensors column.
7. Press the + or – button to highlight the serial number of the moisture sensor that you want to
assign.
8. Continue to the procedure for setting up the start, stop, and pause conditions for moisture
sensors on page 60.
Searching For and Assigning Air Temperature Sensors
The BaseStation 3200 supports 8 air temperature sensors.
1. Turn the dial to the Start, Stop, Pause
position.
2. Press the Next or Previous button to
highlight the Temperature Control Setup
option.
3. Press the Enter button. The Temperature
Sensors screen displays.
4. All is highlighted in the Program column.
Perform one of the following:
 To associate the temperature sensor
with the full controller, continue to step
5.
 To associate the temperature sensor with a specific program, press the + button to
move to the program number. Continue to step 5.
Page 35