8becoming acquainted with wm5 96 – Carlo Gavazzi WM5-96 User Manual

Page 10

Advertising
background image

8

Becoming acquainted with WM5 96

Thanks to the great logging capability of WM5 96, it’s possible to log
a great number of events and manage their displaying, one by one.
The page always displays the last logged event which is given a pro-
gressive number

(a)

. The page is complete with all the important infor-

mation relevant to the logged event: date

(b)

, time

(c)

, type of event

(alarm, min, max, etc.)

(d)

, variable relevant to the event

(e)

. Should the

alarm refer to an alarm, a window

(f)

summing up all the set-point

information (see also following paragraph “alarm status page”).

To display all the logged events one by one, press the “S”

(2)

key, and

scroll the events with the “

”.keys.

To exit the detailed display of the events, press the “S” key.

Thanks to this page, it’s possible to have the complete control of the
set alarms: ON if enabled, OFF if disabled. For the alarms which are
not enabled, the display shows two horizontal hiphens. The column
under the “ALARM” indication identifies the alarm group, for example
01 to 04 represents the group of the first 4 alarms (from 1 to 4) and
their status indicated on the right.

Press the “S” key to display the details

(2)

of each set alarm

(c)

(from

1 to 16):
the values of the programmed set points

(e)

,

the alarm type

(d)

: UP alarm if the “AL” symbol is in the

(d1)

position

as shwon in the figure on the right, WINDOW alarm if the “AL” symbol
is in the

(d2)

position or DOWN alarm if the “AL” symbol is in the

(d3)

position. Moreover, the display shows the alarm status

(g)

which can

be ON or OFF and the value of the alarm variable

(h)

.

To go from one alarm to the other, use the “

” keys. To exit the

display of the alarm status press the “S” key.

Further information on the alarms and the set-point adjustment is
given in the “alarms programming” section of this manual.

Logged events page

To display the first logged event,
press, first press the “

“ key.

Alarm status page

To display the details of the 01
alarm, press the “

” key first.

WM5-96 Instruction Manual

1

2

b

c

d

e

f

a

b

c

d

e

a

1

2

a

b

c

d

g

h

e

d2

f

d1

d3

Advertising