Carlo Gavazzi WM5-96 - Manual (Page 9)

WM5-96 Instruction Manual
Becoming acquainted with WM5 96
Digital input status
Digital output status
Energy meter page
To enter the details of the meters
starting from the division by phase,
press the “
” key first, to start
from the division by month, press the “ ”
key first.
7
1
2
3
a
b
d
c
a
b
This page displays the status of the digital inputs (b) (0, 1, 2) corre-
sponding to each slot (a) . The “ ” symbol will be shown on the right
of a close contact, while the “ ” symbol will be shown on the right of
an open contact, if the digital input is set as “Totalizer” the symbol
“ “ will be displayed.
It’s possible to display the values of the cofigurated totalizer (GAS,
Water...) by keeping the “S” key pressed, and scroll the details by
keeping the “
” keys pressed.
To exit the display of the measurement details press the “s” key.
This page displays the status of the digital outputs (b) (0, 1, 2, 3)
corrsponding to each slot (a) . If the contact or contacts are ON, the “ ”
symbol will be displayed. If the contact or contacts are OFF, the “ ”
symbol will be displayed. If the digital output is set as “pulse output”,
then the symbol “ “ will be displayed. The detail function is not avail-
able in this page.
This page displays the imported kWh (a) , exported kWh (b) , imported
kvarh (c) and exported kvarh (d) energy meters. It’s possible to enter
the details of the meters by keeping the “S” key pressed (2) , and scroll
the details by keeping the “ ” keys pressed (3) .
The countings of the energies can be scrolled divided by:
month (JAN...DEC),
tariff (T01...T12),
phase (L1, L2, L3).
To exit the display of the measurement details press the “s” key.
b
a