Carlo Gavazzi WM5-96 - Manual (Page 11)

Becoming acquainted with WM5 96
The last pages in the “display” mode show the main information relat-
ing to the programming of the instrument. These data are also avail-
able when the instrument is completely sealed.
The first of the 4 pages
(1) only the standards to which the instrument
refers (a, b) are displayed.
In the 2nd page (2) the output specifications of the (infrared light) opti-
cal port and open-collector output (C0) are displayed if these are used
to retransmit the energy.
In the 3rd page
(3) the following data are displayed: system measure-
ment (a) the example figure shows the 3 phase 4 wire symbol, CT and
PT ratio selected (c, d) and the DMD time selected (e) .
In the 4th page (4) the following data are displayed: serial number of
the instrument (a) , production year (b) , firmware release (c) , measuring
input specifications, (d) .
Info pages
9
WM5-96 Instruction Manual
METER INFORMATION
SN BI3230033001P
YEAR 2008
REV 2.1.5.0 (AV5)
INPUT 3x230 (400)V
5 (10)A, 50/60Hz
P40
METER INFORMATION
STANDARDS:
kWh: EN62053-22 CL.0,5
kvarh: EN62053-23 CL.2
P37
METER INFORMATION
TEST OUTPUT CONSTANT:
OPTICAL: kWh+, TOT
1.000 Wh/PULSE
OUT C0: kWh+ TOT
1.000Wh/PULSE
P38
a
b
a
b
c
d
2
1
4
METER INFORMATION
SYSTEM
CT RATIO
1.000
PT RATIO 1.000
DMD TIME 15 min
P39
a
c
d
e
3