Carlo Gavazzi WM5-96 - Manual (Page 38)

36
WM5-96 Instruction Manual
Programming WM5 96
In the clock menu the clock functions can be set. Choose the CLOCK (1) func-
tion by means of the “ ” keys and confirm with “S”. The instrument dis-
plays three functioning modes.
NONE
(2) : WM5 is not supplied with a clock, therefore it will not be possible
to manage the tariffs by means of TIME/CALENDAR (all functions which are
linked to the presence of the clock will be deactivated). Choose the function
NONE by means of the “
“ keys and press the “S” key to confirm.
WITHOUT BACKUP (2) : WM5 will be able to manage date and time but, in
case of power supply failure, it will not store neither time nor date. When the
instrument will be switched on again, the correct date and time will have to be
set again. Select the WITHOUT BACKUP function by means of the “
”
keys and confirm with “S”.
WITH BACKUP
(2) : WM5 is supplied with a clock and the correct date and
time will be stored also in case of power failure. Select the function “WITH
BACKUP” by means of the “
” keys and confirm with “S”. The function
“WITH BACKUP” can be selected only if the AR1039 module is used. Then
all the information necessary to the clock are to be set.
EURO/USA
(3) : set the time format as 24h european (00:00) or 12h american
(12:00 AM). Select the EURO/USA function by means of the “ ” keys and
confirm with “S”. Select EUROPE (3a) , to set the time format as 24h, or choose
USA (3a), to set the time format as 12h.
TIME ZONE (3) : set the time zone related to the place where WM5 is installed,
choose the correct time zone (3b) by means of the “ ” zone and confirm
with “S”. Then select by means of the “ ” keys the correct country (3c)
and confirm with “S”.
DATE
(3) : set the current date, choose the DATE function by means of the “
” keys and confirm with “S”. Then select the date by means of the “ ” keys ,
set the date (3d) and confirm with “S”.
TIME (4) : set the current time, select the TIME function by means of the “ ”
keys and confirm with “S”. Then set the time (4a) by means of the “ ” keys
and confirm with the “S” key.
SYNC
(4) : enables or disables the synchronism of the clock with the digital
inputs enabled as SYNC, the clock at each synchronization pulse will set to
the multiple of the integration time nearer to the current time. Choose the
SYNC function by means of the “
“ keys and confirm with “S”. Then, by
means of the “ ” keys, choose OFF (4b) to disable the synchronism or
ON (4b) to enable it and confirm with “S”.
Clock
The backup of the time is only possible
with the AR1039 module being installed.
************MMAAIINN MMEENNUU************
RREEVV.. 11..44..22..66 ((AAVV55))
ANALOG OUTPUTS
SERIAL OUTPUT
FILTER
CLOCK
**********CCLLOOCCKK MMEENNUU**********
NONE
WITHOUT BACKUP
WITH BACKUP
1
2
********CCLLOOCCKK AADDJJUUSSTT********
2200//0066//0066 0088::2288::2266 AAMM
EURO/USA
TIME ZONE
DATE
TIME
3
******CCLLOOCCKK AADDJJUUSSTT******
2200//0066//0066 0088::2288::2266 AAMM
TIME ZONE
DATE
TIME
SYNC
EUROPE
USA
AFRICA
AMERICA
ANTARCTICA
ARCTIC
ADAK
ANCHORAGE
ANGUILLA
ANTIGUA
DATE
TIME
12 /31/06
10 :04 PM OFF
ON
4
3d
3a
3b
3c
4a
4b
123...
123...
> 2s
Go back
> 2s
Measure