Carlo Gavazzi WM5-96 - Manual (Page 14)

12
Programming WM5 96
This function allows the user to modify the PASS value with a new
value (from 0 to 1000). Press the “S” key and when the instruments
requires a new PASS (2) enter the desired value by means of the “
” keys and confirm the new value with the “S” key. The instrument
goes back to the main menu.
The instrument shows the maximum and minimum limit of the
value available for the password.
The WM5 96 does not support the automatic acknowledgment of the
installed modules, therefore this information must be entered using
the “MODULES” menu. Choose by means of the “
” keys the
modules menu, press “S” to confirm and then select by the “ ”
keys the relevant slot A, B, C, D or E (where slot A is the first on the
top right, watching it from the front of the instrument, and slot E refers
to the central housing). Confirm the highlighted slot with the “S” key
and then select the code of the module (the code is written on the
module itself): the instrument will also display a brief description of
the selected code. The code of the module is placed on the side label
of the module itself. To confirm the code of the selected module,
press the “S” key.
a
Change password
Modules
WM5-96 Instruction Manual
******MMAAIINN MMEENNUU******
RREEVV.. 11..44..22..66 ((AAVV55))
CHANGE PASSWORD
MODULES
SYSTEM
CT RATIO
******MMAAIINN MMEENNUU******
RREEVV.. 11..44..22..66 ((AAVV55))
CHANGE PASSWORD
MODULES
SYSTEMA
CT RAGIO ORTO TA
NUOVA PASS ? 0 000
min 0 000
max 1000
123...
a
1
2
******MMAAIINN MMEENNUU******
RREEVV.. 11..44..22..66 ((AAVV55))
CHANGE PASSWORD
MODULES
SYSTEM
CT RATIO
MMOODDUULLEESS CCOONNFFIIGGUURRAATTIIOONN
AAOO22005500 ((AA00,, AA11))
AANNAALLOOGG OOUUTTPPUUTT 00--2200mmAA
SLOT A
SLOT B
SLOT C
MMOODDUULLEESS CCOONNFFIIGGUURRAATTIIOONN
AAOO22005500 ((AA00,, AA11))
AANNAALLOOGG OOUUTTPPUUTT 00--2200mmAA
AO1059
AO2051
AO2050
1
2
3
> 2s
> 2s
Measure
> 2s
> 2s
Measure
> 2s
Go back
Go back
Go back
Conferma
Confirm