Carlo Gavazzi WM5-96 - Manual (Page 18)

**********MMEETTEERRSS MMEENNUU**********
TARIFF
ENERGY RESET
TOTALIZER RESET
Meters Menu
16
WM5-96 Instruction Manual
Programming WM5 96
This menu allows the user to select/set all the parameters of the ener-
gy meters. From the main menu, select METERS by means of the “
” keys and confirm with the “S” key to enter the METERS menu.
Then choose by means of the “ ” keys if entering the program-
ming of the TARIFF (2) or entering the “ENERGY RESET” menu to
reset the meters (16) ; confirm the selection with S”.
TARIFF (3) : the instrument identifies two operating modes.
BY DIG. INPUTS (by digital inputs) (3) : the instrument manages the
tariff changes by means of the status changes of the digital inputs pro-
grammed as TARIFF (see the section dedicated to the digital inputs).
Select BY DIG. INPUTS by means of the “
” keys and confirm
with the “S” key.
BY CLOCK (3) : the instrument manages the tariffs by means of the
clock integrated in the RS232 serial module. Select BY CLOCK by
means of the “
” keys and confirm with the “S” key, then set the
following additional parameters:
WEEK TYPE (4) : set the WEEK TYPE where for each day you can
select if it’s to be considered a working day or a holiday. The setting
of the week type is very useful to simplify the following programming
of the periods.
Select WEEK TYPE with the “
” keys and confirm with the “S”
key: you enter the window with the list of days (5) , select the desired
day with the “ ” keys and confirm with the “S” key, then choose
by means of the “ ” keys if the day is to be considered as a (W)
WORKING day or as a (H) HOLIDAY (6) , and confirm with the “S” key.
Proceed as above described with the remaining days. To conclude the
operation and go back to step number
(4) , press the “S” for at least 2
seconds.
Warning: for the management of the tariffs with the “BY CLOCK”
option, when counting the energy with WM5, the AR1039 (RS232 +
RTC) option is to be installed. The tariff management “BY CLOCK” is
however possible also without this module, but in this case the
“CLOCK” function, instead of the “METERS” function is to be select-
ed, and then the subfunction “WITHOUT BACKUP”: in this case,
remember that if, for any reason, the instrument is switched off, the
current DATE and TIME will not be stored. These data will have to be
set again every time the instrument is switched on.
********** MMAAIINN MMEENNUU **********
RREEVV.. 11..44..22..66 ((AAVV55))
VT-PT RATIO
DMD/AVG CALCUL.
INSTALLED POWER
METERS
**********MMEETTEERRSS MMEENNUU**********
1
2
3
> 2s
> 2s
Measure
> 2s
BY CLOCK
BY DIG. INPUTS
Go Back
Go Back
Confirm
TTIIMMEE PPEERRIIOODD SSEELLEECCTTIIOONN
WEEK TYPE
PERIODS
DEFAULT TARIFF
TTIIMMEE PPEERRIIOODD SSEELLEECCTTIIOONN
SETTIMANA TIPO
PERIODI
TARIFFA DEFAULT
MONDAY (W)
TUESDAY (W)
WEDNESDAY (W)
THURSDAY (W)
TTIIMMEE PPEERRIIOODD SSEELLEECCTTIIOONN
SETTIMANA TIPO
PERIODI
TARIFFA DEFAULT
LUNEDI (W)
MARTEDI (W)
MERCOLEDI (W)
THURSDAY (W)
(W) WORKING
(H) HOLIDAY
> 2s
Go Back
> 2s
Go Back
> 2s
Go Back
4
5
6
TARIFF
ENERGY RESET
TOTALIZER RESET