Carlo Gavazzi WM5-96 - Manual (Page 33)

31
WM5-96 Instruction Manual
Programming WM5 96
This function allows the user to set the RS232 and RS485 serial ports
as well as the optical port. Choose the SERIAL OUTPUT function
(1)
by means of the “ ” keys and confirm with “S”. Then choose the
serial port to be set and the instrument will synthetically display the
previously set parameters
(a) .
RS232 (2) : set the parameters of the RS232 serial port (AR1039 mod-
ule), if present, then select RS232 by means of the “ ” keys and
confirm with “S”, select the type of parity to be used (2a, 2b) with the
“ ” keys and confirm the selection with the “S” key.
RS485 (2) : set the communication parameters of the RS485 serial port
(AR1034 module, max 9600 bps, AR2040 max, 115,2kbps), if present;
select it by means of the “
” keys and confirm with the “S” key.
Then select the following:
ADDRESS
(3) : select the serial address to be given to the instrument
(from 1 to 247). Enter the desired address (3a) by means of the “ ”
keys and confirm with the “S” key.
BAUD RATE (3) : select the baud rate of the serial port. Select the
desired baud rate value (3b) by means of the “ ” keys and con-
firm with the “S” key.
PARITY
(3) : select the type of parity of the serial port (3c) by means of
the “ ” keys and confirm with the “S” key.
OPTICAL (2) : set the parameters of the front optical port (see next
paragraph “Optical port”).
To exit the various menus and submenus, keep the “S” key pressed
for at least 2 seconds.
Serial outputs
************MMAAIINN MMEENNUU************
RREEVV.. 11..44..22..66 ((AAVV55))
ALARMS
EVENTS SELEC.
ANALOG OUTPUTS
SERIAL OUTPUT
************MMAAIINN MMEENNUU************
MMOODDBBUUSS:: 99660000,,88,,NN,,11
RS232
RS485
OPTICAL
1
2
> 2s
> 2s
Measure
Go back
a
NO PARITY
ODD PARITY
EVEN PARITY
PARITY
ADDRESS
BAUD RATE
PARITY
ADDRESS ? 1.0000.
min 1 00000
max 247 000
NO PARITY
ODD PARITY
EVEN PARITY
9600
19200
38400
115200
2a
2b
3
3a
3b
3c
123...