Canon GALVANO GC-251 - Manual (Page 36)

CANON Digital Galvano Scanner System KP-1SM Series + GC-251
Users Manual 1.00
36
4.2. Step Movement
Execute step movement for a fixed angle.
GALILEO
Select the Step Move tab.
Select an axis for step movement.
Specify the displacement (angle and pulse count) for relative position (STEP) and absolute
position.
Press the MOVE button (either positive or negative position direction can be specified).
RS-232C command
Target value setting mode (Command ID = 10)
Target position setting (Command ID = 20)
Movement start (Command ID = 8)