Dell PowerVault TL4000 - Manual (Page 124)

2. Press the SELECT button to highlight the first digit of the 4-digit Access PIN.
3. Use the UP and DOWN buttons to select each digit.
4. Press the SELECT button to move to the next digit.
5. Repeat these steps for repeating the Access PIN.
6. After entering the final digit, press the DOWN button and select one of the
following:
v Save - to apply your settings.
v Cancel - to delete your settings.
Note: In Figure 5-18, menus with the pound sign (#) are the only menus
accessible when the Access PIN is enabled, but entered incorrectly or
before it is entered. To gain access to all menus, disable the Access PIN
or enter the correct PIN number when requested.
Configure: Save/Restore
Use this menu item to restore the factory default settings.
Figure 5-18. Pound sign (#) shows accessible menus when access PIN is enabled but before it is entered
5-26 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide