Dell PowerVault TL4000 - Manual (Page 65)

Note: The rail must be fastened with the bottom of the rail parallel to floor and
at the same level.
4. Using the Torx wrench included in your shipment, remove the screws ( 1 ) as
shown in Figure 4-12 on page 4-12. Screw locations on the 4U library are
similar.
a77ug
1
9
6
a77ug27
1
Figure 4-11. Kit A (top picture with circles) showing rails installed. Rack Kit B is below showing the front view of this kit
installed.
Chapter 4. Installation and Configuration 4-11