Dell PowerVault TL4000 User Manual
Page 248
04d
Library
Hardware D
C
v
Ensure that the media changer and drives are not being used by any
host, then reset the library from the front panel.
v
If the problem persists, contact technical support.
13d
Library Pick
Retry
W
There is a potential problem with the cartridge loader picking a cartridge
from a drive or slot.
v
No action needs to be taken at this time.
v
If the problem persists, contact technical support.
This flag is cleared when the next move command is received.
14d
Library Place
Retry
W
There is a potential problem with the cartridge loader placing a cartridge
into a slot.
v
No action needs to be taken at this time.
v
If the problem persists, contact technical support.
This flag is cleared when the next move command is received.
15d
Drive Load
Retry
W
There is a potential problem with the cartridge loader or drive when
placing a cartridge into a drive.
v
No action needs to be taken at this time.
v
If the problem persists, contact technical support.
This flag is cleared when the next move command is received.
17d
Library I/O
Station
C
There is a mechanical problem with the library media I/O Station.
18d
Media
Changer
C
It is set when a magazine is removed from the changer.
19d
Library
Security
W
Library security has been compromised. The door was opened then
closed during operation.
21d
Media
Changer
I
It is set when the changer is set offline.
24d
Library
Inventory
C
The library has detected an inconsistency in its inventory.
v
Redo the library inventory to correct inconsistency.
v
Restart the operation.
Check the applications users manual or the hardware users manual for
specific instructions on redoing the library inventory.
25d
Media
Changer
W
It is set when it receives unsupported SCSI opcodes.
27d
Cooling FAN
Failure
W
One or more fans inside the library have failed. This flag is cleared when
all fans are working again.
32d
Unreadable
Bar Code
Labels
I
The library was unable to read the barcode on a cartridge.
v
D = Decimal
v
I = Informational suggestion to user
v
W = Warning. Remedial action is advised. Performance of data may be at risk.
v
C = Critical immediate remedial action is required.
B-2
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide