Feature activation key screen, Configure library: encryption activation screen – Dell PowerVault TL4000 User Manual
Page 82
Minimum Prerequisites for Library Managed Encryption (LME) - LTO 5:
v
SAS and Fibre Channel LTO Ultrium 5 Tape Drive
v
Ultrium 5 Tape Cartridge
v
Library firmware level 9.00 or higher
v
Drive firmware level BBNE/BBNF or higher, for reference go to
v
Encryption Key Manager application (IBM SKLM)
Minimum Prerequisites for Library Managed Encryption (LME) - LTO 4:
v
SAS and Fibre Channel LTO Ultrium 4 Tape Drive
v
Ultrium 4 Tape Cartridge
v
Library firmware level 5.80 or higher
v
Drive firmware level 77BE or higher
v
Encryption Key Manager application (IBM SKLM)
Setting a Drive's Method of Encryption
1.
Click Configure Library > Encryption in the left navigation panel.
2.
On the Encryption screen, enter the Feature Activation Key to make available
the library managed encryption options.
3.
Click Activate to save the key and expand the screen for additional encryption
settings.
4.
Select Enable SSL for EKM to enable Secure Sockets Layer for the IBM SKLM
application.
5.
Select an Encryption method for each logical library.
v
Without an encryption license key, select None or Application Managed
Encryption
.
v
With an encryption license key, select Library Managed Encryption.
6.
Select an Encryption policy for each logical library.
v
Encrypt All
: This is the default policy. It encrypts all cartridges using the
default data keys specified in the key manager. This setting applies to all
drives in a TL2000/TL4000 logical library.
a77ug
1
99
Figure 4-29. Feature Activation Key screen
a77ug
1
92
Figure 4-30. Configure Library: Encryption Activation screen
4-28
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide