Dell 5100cn Color Laser Printer - Manual (Page 105)

parameters are reset to their default values.
Clear Storage
Purpose:
To clear all files that are stored as Secure, Store, and Proof Print in the RAM Disk.
NOTE: The Clear Storage menu is only displayed when the RAM Disk is set to Auto, or the optional hard drive is
configured.
Format HDD
Purpose:
To initialize the optional hard drive.
NOTE: The Format HDD menu is only displayed when an optional hard drive is installed on your printer.
Non-Dell Toner
Purpose:
To specify whether to use the refilled toner cartridge or not. When this setting is On, you can use toner cartridges provided
by other companies.
Values:
On
Enables the use of refilled toner cartridges.
Off*
Disables the use of refilled toner cartridges.
Parallel
The Parallel menu can be adjusted to configure the parallel interface.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
ECP
Purpose:
To specify the ECP communication mode of the parallel interface. The change becomes effective after the printer is turned
off and then on again.
Values:
On*
The ECP communication mode is enabled.
Off
The ECP communication mode is disabled.