Dell 5100cn Color Laser Printer User Manual
Page 147
Advertising
6. Close the front cover.
7. Insert the tray into the printer, and push until it stops.
CAUTION:
Do not use excessive force on the tray. Doing so could damage the tray or the inside the
printer.
Removing Print Jams Between the Imaging Drum and Fuser
NOTE:
To resolve the message displayed on the operator panel, you must clear all print media from the print media
path.
1. Turn off the printer and wait for 30 minutes.
2. Push the front latch up and fully open the front cover.
3. Move the levers at both ends of the fuser to their open position and remove the jammed paper.
If the paper is torn, remove any scraps of paper remaining inside the printer.
Advertising