Dell 5100cn Color Laser Printer - Manual (Page 291)

For SuSE 9:
a. Select Start Applications ® System ® YaST.
b. Type the administrator's password.
YaST Control Center is activated.
c. Select Hardware from Printer.
For SuSE 8.2:
a. Select SuSE work menu ® Administration ® YaST2 modules ® Hardware ® Printer.
b. Type the administrator's password.
2. Printer setup: Autodetected printers is activated.
3. Click Change....
4. Select the printer you wan to set to default, and then click Set as default.
5. Click Finish.
NOTE: For SuSE 8.2, also click Continue.
Specifying the Printing Options
You can specify the printing options such as color mode or double-sided printing.
1. Select Start Applications ® Internet ® Web Browser.
The browser is activated.
NOTE: For SuSE 8.2, select Start Applications ® Internet ® WWW ® Konqueror Web Browser.
2. Type http://localhost:631/admin in Location, and then press the <Enter> key.
3. Type root as the user name, and type the administrator's password.
The CUPS window appears.
NOTE: If you use SuSE 9, set the password for authority as the printer administrator before setting the printer
queue. If you have not set it, go to " Setting the Password for Authority as the Printer Administrator (For SuSE 9) ."
4. Click Manage Printers.
5. Specify the required settings, and then click Continue.
The message Printer xxx has been configured successfully. appears.
The setting is complete. Execute printing from the application program.
Setting the Password for Authority as the Printer Administrator (For
SuSE 9)
If you use SuSE 9, you must set the password for authority as the printer administrator to do operations as the printer
administrator. If you use SuSE 8.2, you do not need to do this.
1. Select Start Applications ® System ® Terminal ® Konsole.
2. Type the following command on the terminal window.