Dell 5100cn Color Laser Printer - Manual (Page 86)

5. Make sure the type setting for the multipurpose feeder is set to the correct value for the print media you have
loaded.
6. Select print media source, size, and type in your software program and select the print media size and type on the
printer operator panel.
Loading Envelopes
To load envelopes that are under 8.66 inches (220 mm) in width in the multipurpose feeder, insert the envelopes either
with the flaps closed and at the right side or the flaps open and at the rear. To load envelopes that are over 8.66 inches
(220 mm) in width in the multipurpose feeder, insert the envelopes with the flaps closed and the short-edge of the
envelopes facing into the printer. The print side must be facing down. You can load envelopes up to the maximum fill line
in the tray at one time.
NOTE: Make sure set the envelope flaps are completely unfolded.
NOTICE: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and
damage to the printer.
Using the Multipurpose Feeder
Load only one size and type of print media during a single print job.
To achieve the best possible print quality, use only high-quality print media that is designed for use in laser
printers. For more guidelines on print media, see " Print Media Guidelines ."
Do not add or remove print media when there is still print media in the multipurpose feeder or when the printer is
printing from the multipurpose feeder. This may result in a paper jam.
Print media should be loaded with the recommended print side down and the top of the print media going into the
multipurpose feeder first.