Dell 5100cn Color Laser Printer - Manual (Page 117)

To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Values:
Off*
Does not print in the draft mode.
On
Prints in the draft mode.
Line Termination
Purpose:
To add the line termination commands.
Values:
Off*
The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Color Mode
Purpose:
To specify the color mode to Color or Black. This setting is used when the color printing mode setting is not specified for
the print job that is sent to the printer.
Value:
Black*
Prints in the black and white mode.
Color
Prints in the color mode.
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation printer
language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose: