Dell 5100cn Color Laser Printer - Manual (Page 32)

AppleTalk Printer Specifies the printer name in the AppleTalk network up to 32 alphanumeric characters and
symbol sets.
AppleTalk
Zone
Specifies the AppleTalk zone name up to 32 alphanumeric characters and symbol sets.
AppleTalk
Type
Displays the AppleTalk type.
NOTE: An optional multi protocol card is required to display the AppleTalk page.
E-Mail Alert
Purpose:
To configure detailed settings for E-Mail Alert. This page can also be displayed by clicking E-Mail Alert in the Left Frame.
Values:
Primary SMTP Gateway Sets the primary SMTP gateway.
Reply Address Designates the reply e-mail address sent with each E-mail Alert.
SMTP Server Connection Displays the status of the SMTP server connection.
E-Mail List 1 Sets acceptable e-mail addresses for the E-Mail Alert feature up to 255
alphanumeric characters.
E-Mail List 2 Sets acceptable e-mail addresses for the E-Mail Alert feature up to 255
alphanumeric characters.
Select Alerts for
List 1
Supplies Alerts Select the check box to receive an E-Mail Alert for consumables.
Paper Handling
Alerts
Select the check box to receive an E-Mail Alert for paper handling.
Service Call Select the check box to receive an E-Mail Alert for Service Calls.
Select Alerts for
List 2
Supplies Alerts Select the check box to receive an E-Mail Alert for consumables.
Paper Handling
Alerts
Select the check box to receive an E-Mail Alert for paper handling.
Service Call Select the check box to receive an E-Mail Alert for Service Calls.
SNMP
Purpose:
To configure the detailed settings of SNMP.
Values:
Community
Name (Read
only)
*1
Specifies the community name to access (read only) the data up to 31 alphanumeric characters.
The original setting will remain valid if no input is made. Characters entered for community Name in
previous settings will not be displayed on the screen. The default Read/Write Community is Private.
Community
Name
(Read/Write)
*1
Specifies the community name to access (read and write) the data up to 31 alphanumeric
characters.
The original setting will remain valid if no input is made. Characters entered for community Name in
previous settings will not be displayed on the screen. The default Read/Write Community is Public.