Dell 5100cn Color Laser Printer - Manual (Page 167)

42. Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
43. Click OK.
44. Type in some gibberish in the body of the document and click Print!
Setup printing Letter Plain 1 from Tray1
1. On the printer operator panel press MENU.
2. Press to get to Tray Settings.
3. Press to select Tray Settings.
4. Press to get to Paper Size. (ONLY ON 3x00cn)
5. Press to select Paper Size. (ONLY ON 3x00cn)
6. Press to get to Tray 1. (ONLY ON 3x00cn)
7. Press to select Tray 1. (ONLY ON 3x00cn)
8. Using and , select the appropriate paper size (Letter). (ONLY ON 3x00cn)
9. Press the middle button, SELECT, once Letter is displayed on the lower line, this puts a * by it. (ONLY ON 3x00cn)
10. Now we have the Tray 1 Size set to Letter. (ONLY ON 3x00cn)
11. Now press MENU to get back to Tray Settings/Paper Size.
12. Press to get to Paper Type.
13. Press to select Paper Type.
14. Press to get to Tray 1.
15. Press to select Tray 1.
16. Using and , select the appropriate paper type (Plain 1).
17. Press SELECT, once Plain 1 is displayed on the lower line.
18. Now we have the Tray 1 Type set to Plain 1.
19. Now press MENU to get back to Ready to Print.
20. Now insert the Letter-sized stack of paper into the Tray 1.
21. On the screen Tray 1/Letter will appear. (ONLY ON 3x00cn)
22. Press SELECT to confirm this. (ONLY ON 3x00cn)
23. Now on the screen Tray 1/Plain 1 will appear.
24. Press SELECT to confirm this.
25. We now have all the hardware settings on the printer correct.
Now, all software settings screen shots are from WORD, this was done in Word. However if in any application, you go File
® Print and then click the Properties button, you will get this same driver properties window.
26. Open up Word and create a new document.
27. Go to File ® Print.
28. Select the Dell Color Laser Printer from the printers list.