Dell 5100cn Color Laser Printer - Manual (Page 246)

-y ct
Specifies Color Transformation.
This option is available only for color printing.
-y -hld=PrintType:UserID:Password:DocumentName
Secure Print
PrintType
store
Secure Print/Store Print
proof
Proof Print
UserID
Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon).
Password
Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters).
DocumentName
Up to 12 single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon).
Secure Print
-y hld=
store:UserID:Password:DocumentName
-y hld=store: UserID:Password:
Store Print
-y hld=store: UserID::DocumentName
-y hld=store: UserID::
Proof Print
-y hld=proof: UserID::DocumentName
-y hld=proof: UserID::
Printing (HP-UX)
This section provides information on printing from the registered logical printer during the installation.
Printing From HP-UX
To print to the default printer:
If the printer is registered as the default printer, the name of the printer can be shortened and specified as shown in
the following example.
% lp filename
To print to other printers:
To print to a printer named dell5100cn, type as follows.
% lp -d dell5100cn filename
To change the default printer temporarily for printing:
To change the default printer, set the printer name in the environment variable PRINTER.
To set a printer named dell5100cn as the default printer for printing, type as follows.
% setenv PRINTER dell5100cn
% lp filename