To change the spectrum analytical display mode – Sony SX-N737 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CHANGING THE SPECTRUM ANALYTICAL DISPLAY

CAMBIO DE LA INDICACIÓN ANALÍTICA DE ESPECTRO

MODIFICATION DE L’AFFICHAGE DE L’ANALYSEUR DE SPECTRE

A wide variety of spectrum analytical displays сап

En el visualizador podrá mostrarse una gran

Vous avez le choix entre plusieurs types

be shown in the display window.

variedad de indicaciones analíticas de espectro.

d’affichages de l’analyseur de spectre.

DISPLAY MODE

After pressing DISPLAY MODE once, press it

repeatedly within 4 seconds. Each time the

button is pressed, the spectrum analytical
display changes cyclically as follows:

Después

de

haber

presionado

una

vez

DISPLAY

MODE,

presiónelo

repetidamente

ante de 4 segundos. Cada vez que presione
el botón, la indicación analítica de espectro,
cambiará cíclicamente de la forma siguente:

Après une pression sur la touche DISPLAY
MODE, appuyez de façon répétée dans les 4
secondes. Chaque pression sur la touche

change l’affichage de l’analyseur de spectre

selon le cycle suivant:

To change the spectrum analytical display mode

Changing the display mode is possible if the current time appears

on the right side of the display window. When the current function

appears instead of the time, press DISPLAY MODE once to show

the current time. Then, press repeatedly to select the desired

display mode.

* This display moves irrespective of the signal level.

Para cambiar el modo de indicación anaiítica de espectro

El cambio de modo de indicación será posible si en la parte

derecha del visualizador está indicándose la hora actual. Cuando
en vez de la hora esté indicándose la función actual, presione
DISPLAY MODE para que aparezca la hora actual. Después,

presione repeticamente para seleccioner el modo de indicación.

* Esta visualización se moverá independientemente del nivel de

la señal.

Pour changer le mode d’affichage de l’analyseur de spectre

Vous pouvez changer de mode quand l’heure apparaît sur la

droite de l’afficheur. Si la fonction utilisée apparaît à la place de

l’heure, appuyez une fois sur DISPLAY MODE pour afficher
l’heure. Appuyez ensuite de façon répétée pour choisir le mode

d’affichage souhaité.

* L’affichage bouge sans tenir compte du niveau du signal.

J

19

Advertising