Note on installation – Nikon 35MM Film Scanner LS-10E User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note on installation
1. Turn off the power switches for the equipment. (The
LS-10 is not provided with a power switch. Aiways
turn off the switch on the computer.)
2. Turn off the power switches for ali the devices
(printer, display) connected to the computer.
3. Move the key to the unlock position if the computer
has a key-lock mechanism.
4. Unplug all the cables, including the power cords.
5.
6
.
Remove the cover of computer as described in the
manual.
Remove the cover of the bay as described in the
manual.
'Warning!
'
‘ ‘
Electrostatic discharge will 'damage the scanner if
you touch the s'canner’s connector pins. Do not
touch the pins.''
'
"
12