AVer NXU Lite - Manual (Page 104)

96
3.3 Recording Setting
In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving,
and click Default to revert back to original factory setting.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the
ALL check box. To select more than one camera, Right click on the camera icon. To select one
camera only, Left click on the camera icon. The camera icon turns red when it is selected. The
camera icon will be different that depends on the camera type.
(2) Recording Mode
 Weekly Record Mode: Setup the recording schedule by week.
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical block 1 to 7
represent the day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a
week, select the recording mode and click the  button. If you want to only record at a particular time
or day, click Schedule button and select the Recording Mode , and then click on the time or day
blocks. When the system starts recording a red triangle mark would appear at the upper left corner of
the screen.